New Fuse Boxes Sunderland

Fuse Box Upgrades in Sunderland

The consumer unit in If you require a fuse board upgrade and are in Sunderland and the North East area, look no further, North East Electrical have you covered. Our qualified electricians specialise in fuse box upgrades and will ensure that you receive a safe and secure service. For more information, call our team today.

INSTANT QUOTE & AVAILABILITY

Need a new Fuse Box?

Find out all you need to know about Consumer Unit Upgrades…

How Much Does a New Consumer Unit Cost?

New Fuse Box supplied and fitted From £350 – 400.00 +VAT

Includes:

  • Removal of old Consumer Unit
  • Supply and Install a new 18th edition Consumer Unit
  • Test and supply certificate on completion
  • All workmanship guaranteed for 2 Years

Potential Extra’s

  • Upgrade Main Earth
  • Upgrade earthing to Gas and Water
  • Upgrading of Meter Tails
  • Any Faults found on existing installation
New Fuse Box

Fuse Board Upgrades from North East Electrical

At North East Electrical, our team of electricians are industry trained and fully qualified to provide all types of electrical installations for domestic clients. Our engineers are registered and Stoma approved, we specialise in reliable and fully guaranteed consumer unit upgrades and installations to customers across Sunderland.

We are trusted and experienced electricians who take pride in the job and a job done well. We offer…

  • 24 hour and emergency call out for electrical failures
  • Quality electrical installation services including consumer units
  • Comprehensive Electrical Installation Condition Report (EICR)
  • 100% guarantees on all consumer unit installations

How Do I Know If I need a new Fuse Box?

It’s important that old type fuse boards are replaced by a next generation consumer unit which conforms to meet BS7671 amendment 3, which came into force in January 2015. This is to make sure electrical safety around your home and and the unit must also be installed by a registered electrician.

A consumer unit can be replaced at any time but is often carried out at the same time as a rewiring job, an electrical repair or any other job will need to comply with the new regulations. Before the replacement unit can be installed it’s recommended that an EICR is carried out to make sure the existing wiring system is suitable for the new unit. Once it has been installed our team will commission and certify the installation.

If you are unsure whether or not you need a new Fuse box, please contact us and we can advise on what’s the best approach to take.  Otherwise please look at the pictures below which gives a good indication if your consumer box is in need of an upgrade.

If your Fuse Box looks similar to one of the pictures below then we would recommend looking into upgrading to a new 18th edition Consumer Unit.

Old DB
re-wirable fuse
old consumer unit

Fuse Box FAQ

How long will it take?

Normally I would allow 4 – 8 hours depending on the size and number of circuits.

Will the electricity have to be turned off?

Yes the electricity will have to be turned off, while the new consumer unit is being installed.

Should i get a certificate?

Yes, you will receive an installation certificate and you should also receive a building notification from building control.

How much will a new fuse box cost?

You can expect to pay £350 – £400 + VAT depending on the size of DB

Does it come with a guarantee?

Yes, all our workmanship comes with a massive 5 year guarantee !

How long will it last for?

That all depends on the age and condition of the existing wiring within the property.

Why do i need a new Fuse Box?

Having an old fuse box does not automatically mean you need to upgrade. As long as it passes an Electrical Installation Condition Report EICR. However it is an indication that the wiring may be old.

A new 17th edition fuse box is a lot safer compared to the old re-wirable fuses in regards to protection against electric shock and also reducing the spread of electric fires started in the fuse box.

Upgrade My Old Fuse Box

What is an RCD?

“An RCD is a life-saving device which is
designed to prevent you from getting
a fatal electric shock if you touch
something live, such as a bare wire.
It provides a level of protection that
ordinary fuses or circuit-breakers cannot.
Like a smoke detector, an RCD installed
in your fuse box could save your life”

For Fuse Box Upgrades in Sunderland, call North East Electrical today

For fuse board upgrades in Sunderland area, give North East Electrical a call today, our professional team are more than happy to help and specialise in in fuse box upgrades. For a free quote call today.